Information

New products

Specials

Auto Provision - Escene IP Phone- Register Otomatis ke IP PABX

Auto Provision ESCENE IP Phone ES290

Auto Provision

Pre-configuration on TFTP/HTTP/HTTPS/FTP Server

When the software or kernel auto-provision is enabled and want to run, IP Phone will

check the software and kernel version at first, so we need make some

pre-configuration on the provisioning server.

Auto Provision for Software:

1. Create a notepa...

Auto Provision ESCENE IP Phone ES290

Auto Provision

Pre-configuration on TFTP/HTTP/HTTPS/FTP Server

When the software or kernel auto-provision is enabled and want to run, IP Phone will

check the software and kernel version at first, so we need make some

pre-configuration on the provisioning server.

Auto Provision for Software:

1. Create a notepad file named“F000X00.cfg”(the “X” is decided by the model of

the IP phone you are using, for example, if the model is ES620, the file name is

“F000600.cfg”);

*Named rule of the file:

F00600.cfg: for ES620, ES610 and DS622;

F00400.cfg: for ES410 and DS412;

F00300.cfg: for ES310 and DS312;

F00200.cfg: for ES210 and DS212.

2. Open the notepad file “F000X00.cfg” and write the new software name in it, for

example,

S_ES6xx_version2.0.4.6: for ES620, ES610 and DS622;

S_ES410_version2.0.4.6: for ES410 and DS412;

S_ES310_version2.0.4.6: for ES310 and DS312;

S_ES210_version2.0.4.6: for ES210 and DS212

Write down the new version you want to upgrade and save it on your

provisioning server.

*Please note that if the version is not older than (and same as) the one on your phone,

auto-provision of your software would be not available.

3. After it, upload the new software to the TFTP/HTTP/HTTPS/FTP provisioning

server and complete the pre-configuration steps.

Auto Provision for Kernel:

1. Create a notepad file named“K000X00.cfg”(the “X” is decided by the model of

the IP phone you are using, for example, if the model is ES620, the file name is

“K000600.cfg”);

*Named rule of the file:

K00600.cfg: for ES620, ES610 and DS622;

K00400.cfg: for ES410 and DS412;

K00300.cfg: for ES310 and DS312;

K00200.cfg: for ES210 and DS212.

2. Open the notepad file “K000X00.cfg” and write the new kernel name in it, for

example,

K_uImage_600.bin_version2.1.6: for ES620, ES610 and DS622;

K_uImage_400.bin_version2.1.6: for ES410 and DS412;

K_uImage_300.bin_version2.1.6: for ES310 and DS312;

K_uImage_200.bin_version2.1.6: for ES210 and DS212

Write the new version you want to upgrade and save it on your provisioning

*Please note that if the version is not older than (and same as) the one on your phone,

auto-provision of your kernel would be not available.

3. After it, upload the new kernel to the TFTP/HTTP/HTTPS/FTP provisioning server

and complete the pre-configuration steps.

Configuration files on TFTP/HTTP/HTTPS/FTP Server

l Name of configuration file:

The configuration file on the provisioning server is named as the MAC address of IP

phone itself. Escene’s IP phones support two different configuration files for

auto-provision:

1. Normal Configuration file:

Normal Configuration file is the configuration file of your Escene IP phone. You can

download it from your phone (You can see the following chapter to see how to

download a configuration file from Escene IP hone) and modify by yourself. If the IP

phone’s MAC address is 00:11:22:33:44:55, the normal configuration file of it should

be 001122334455.xml.

2. Broadsoft Configuration files:

Broadsoft Configuration files support the format of Broadsoft IP-PBX. However, you

can use them for provisioning. There are two files should be set on your provisioning

server, they are also named by the MAC address of your phone

1) 001122334455.cfg: a configuration file for system settings, for example,

network, audio and so on.

2) 001122334455.txt: a configuration file for SIP accounts.

l Download a configuration file from your phone:

You can download a configuration file from your phone by HTTP as follow:

1. Open the web page of your IP phone, click “Phone Maintenance”>“HTTP

Upgrade”;

2. Then click “Download” of Configuration:

3. If you want to use this file to auto-provision, you just need to modify it by

yourself and rename it to the MAC address of your IP Phone with .xml suffix.

Extern.xml file on TFTP/HTTP/HTTPS/FTP Server

The Extern.xml includes the settings of programmable buttons on the phone and all

Expansion Modules. All the phones can download the settings from a same file and

they will have the same settings (for example, Speed-dial, BLF and so on).

*You cant rename the file on the provisioning server. The file name is fixed to

Account1_Extern.xml.(Account1 is the first account you register)

Phonebook on TFTP/HTTP/HTTPS/FTP Server

Escene IP phone supports Enterprise Phonebook and Personal Phonebook.

l Enterprise Phonebook:

Enterprise Phonebook is used for all staffs in your office. All phones will download a

common phonebook for all staffs. The file’s name must be

Enterprise_Phonebook.xml on your provisioning server and you can not rename it.

l Personal Phonebook:

Personal Phonebook is individual for each IP phone. The file on your provisioning

server is named by the first account of your IP phone. If the IP phone’s first account is

1287, the Personal Phonebook of this phone is 1287_Phonebook.xml.

Automatic Provisioning using DHCP Option 66

The following steps will descript auto-provision by TFTP. You also can use HTTP and

FTP for auto-provision with our phones.

DHCP Server: (MicrosoftWindows 2003 server)

1. Start up the “DHCP Management Console”;

2. Expand the DHCP scope which will contain the phones

3. Right-click on the “Scope Options” node

4. Select “Configure Options”

5. In the “General” tab, scroll down the list of options and identify the option

labeled “066 Boot Server Host Name”

6. Enable the “066 Boot Server Host Name” and enter the string value according to

the examples discussed previously

string value:

192.168.0.201(TFTP Server IP Address);

7. Click the “OK” button

IP Phone:

1. Input the IP Phone’s IP Address in browser;

2. Enter user and password with “root” then open the web page;

3. Click “Phone Maintenance” and select “Auto Provision”;

4. Select like as follows:

5. Click “Submit” to save it.

Auto-Provision via fixable TFTP/HTTP/HTTPS/FTP Server

IP Phone:

1. Input the IP Phone’s IP Address in browser;

2. Enter user and password with “root” then open the web page;

3. Click “Phone Maintenance” and select “Auto Provision”;

4. select like as follows:

It supports three protocols in Auto-Provision:TFTP,HTTP and FTP.

The format with provisioning server URL is:

TFTP:

TFTP://192.168.0.201(192.168.0.201 is the default Server IP address)

HTTP:

HTTP://192.168.0.201

HTTPS:

HTTPS://192.168.0.201

FTP:

FTP://192.168.0.201

Username: the user to login FTP/HTTP/HTTPS server

Password: the password of the user using to login FTP/HTTP/HTTPS server

*Username and password are available in FTP/HTTP/HTTPS only (unavailable in

TFTP).

Auto Download Software:

Download software from server and upgrade it automatically.

Auto Download Kernel:

Download kernel from server and upgrade it automatically.

Auto Download Config File:

Download configuration file from server and update it automatically.

BroadsoftCompatibility:

If you select this function, you need to put two configuration files (with

Broadsoft format) on the provisioning server. Otherwise, you can download the

configuration file from your phone via HTTP (regarding the steps, you can refer to

Download a configuration file from your phonein this document.), modify it and

upload it to the server for auto-provision.

Auto Download Expansion:

Download configuration file of the Programmable buttons on your phone or

Expansion Modules automatically.

Auto Download Enterprise Phonebook:

Download Enterprise Phonebook from server and update it automatically.

Auto Download Personal Phonebook:

Download Personal Phonebook from server and update it automatically.

Booting Checked:

Check all items you had selected and upgrade/update them when the phone boot

Auto Provision Frequency:

The auto provision Frequency which you want.

Auto Provision Time:

The time you want to execute auto-provision.

Examples of Auto Provision Frequency and Time

1) When you set the Auto Provision Frequency and disableAuto Provision Time

(set to None), the Auto Provision function will work after the AutoProvision

Frequency;

2) When you set both Auto Provision Frequency and Auto Provision Time, for

example:

You set the AutoProvision Frequency to 24 hours, and the Auto Provision Time

to 2:00 at 8:00 today (1, Jan), it will pass 24 hours at first and work at the

nearest 2:00, it means that the Auto Provision function will work at 2:00 on the

day after tomorrow (3, Jan).

Therefore, if you want this function work at 23:00 tonight and it is 8:00 now, you

need to set the Auto Provision Frequency to 0 hours and the Auto Provision

Time to 23:00.

AES Encryption:

AES encryption is used for all the setting files of your phone (include configuration

file, Expansion file, Enterprise/Personal Phonebook etc. You just need to enable the

AES Encryption function and input the AES Key matching the one on your server on.

More

Auto Provision - Escene IP Phone- Register Otomatis ke IP PABX There are no products in this category.